Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
From: Mathias Nyman <hidden>
Date: 2020-05-13 07:02:39
Also in:
linux-pci, linux-usb, lkml
On 11.5.2020 17.25, Lorenzo Pieralisi wrote:
On Tue, May 05, 2020 at 06:13:17PM +0200, Nicolas Saenz Julienne wrote:quoted
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideoCore. Inform VideoCore that VL805 was just reset. Also, as this creates a dependency between USB_PCI and VideoCore's firmware interface, and since USB_PCI can't be set as a module neither this can. Reflect that on the firmware interface Kconfg. Signed-off-by: Nicolas Saenz Julienne <redacted> --- Changes since v5: - Fix Kconfig issue with allmodconfig Changes since v4: - Do not split up error message Changes since v3: - Add more complete error message Changes since v1: - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it gets compiled when needed. drivers/firmware/Kconfig | 3 ++- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-)Hi Mathias, I would need your ACK to merge this series, thanks. Lorenzo
Ah, yes, of course Acked-by: Mathias Nyman <redacted> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel