Thread (19 messages) flat view 19 messages, 7 authors, 2020-06-02

Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk

From: Lorenzo Pieralisi <hidden>
Date: 2020-05-11 14:25:21
Also in: linux-pci, linux-usb, lkml

On Tue, May 05, 2020 at 06:13:17PM +0200, Nicolas Saenz Julienne wrote:
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideoCore. Inform VideoCore that VL805 was just reset.

Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface, and since USB_PCI can't be set as a module neither
this can. Reflect that on the firmware interface Kconfg.

Signed-off-by: Nicolas Saenz Julienne <redacted>
---

Changes since v5:
 - Fix Kconfig issue with allmodconfig

Changes since v4:
 - Do not split up error message

Changes since v3:
 - Add more complete error message

Changes since v1:
 - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it
   gets compiled when needed.

 drivers/firmware/Kconfig      |  3 ++-
 drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)
Hi Mathias,

I would need your ACK to merge this series, thanks.

Lorenzo
quoted hunk ↗ jump to hunk
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 8007d4aa76dc..b42140cff8ac 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -178,8 +178,9 @@ config ISCSI_IBFT
 	  Otherwise, say N.
 
 config RASPBERRYPI_FIRMWARE
-	tristate "Raspberry Pi Firmware Driver"
+	bool "Raspberry Pi Firmware Driver"
 	depends on BCM2835_MBOX
+	default USB_PCI
 	help
 	  This option enables support for communicating with the firmware on the
 	  Raspberry Pi.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 92150ecdb036..0b949acfa258 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,9 @@
 #include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
 #include "pci-quirks.h"
 #include "xhci-ext-caps.h"
 
@@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
 
 static void quirk_usb_early_handoff(struct pci_dev *pdev)
 {
+	int ret;
+
 	/* Skip Netlogic mips SoC's internal PCI USB controller.
 	 * This device does not need/support EHCI/OHCI handoff
 	 */
 	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
 		return;
+
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+		ret = rpi_firmware_init_vl805(pdev);
+		if (ret) {
+			/* Firmware might be outdated, or something failed */
+			dev_warn(&pdev->dev,
+				 "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n",
+				 ret);
+		}
+	}
+
 	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
 			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
 			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
-- 
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help