Re: [PATCH] ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2
From: Tony Lindgren <tony@atomide.com>
Date: 2020-05-05 18:42:27
Also in:
linux-devicetree, linux-omap, lkml
* Adam Ford [off-list ref] [200504 16:02]:
Various OMAP3 boards have two AES blocks, but only one is currently available, because the hwmods are only configured for one. This patch migrates the hwmods for the AES engine to sysc-omap2 which allows the second AES crypto engine to become available. omap-aes 480a6000.aes1: OMAP AES hw accel rev: 2.6 omap-aes 480a6000.aes1: will run requests pump with realtime priority omap-aes 480c5000.aes2: OMAP AES hw accel rev: 2.6 omap-aes 480c5000.aes2: will run requests pump with realtime priority
Great :) Looks like I'm getting the following though: DTC arch/arm/boot/dts/am3517-craneboard.dtb arch/arm/boot/dts/omap3.dtsi:160.39-184.5: ERROR (phandle_references): /ocp@68000000/target-module@480a6000: Reference to non-existent node or label "aes1_ick" Is this patch maybe missing a change for am3717 for the aes1_ick? Regards, Tony _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel