10.03.2020 20:05, Thierry Reding пишет:
On Tue, Mar 10, 2020 at 07:19:59PM +0300, Dmitry Osipenko wrote:
quoted
10.03.2020 18:19, Thierry Reding пишет:
quoted
From: Joseph Lo <redacted>
Introduce the low jitter path of PLLP and PLLMB which can be used as EMC
clock source.
Signed-off-by: Joseph Lo <redacted>
Signed-off-by: Thierry Reding <redacted>
---
drivers/clk/tegra/clk-tegra210.c | 11 +++++++++++
include/dt-bindings/clock/tegra210-car.h | 4 ++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 45d54ead30bc..f99647b4a71f 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -3161,6 +3161,17 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
clk_register_clkdev(clk, "pll_m_ud", NULL);
clks[TEGRA210_CLK_PLL_M_UD] = clk;
+ /* PLLMB_UD */
+ clk = clk_register_fixed_factor(NULL, "pll_mb_ud", "pll_mb",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "pll_mb_ud", NULL);
+ clks[TEGRA210_CLK_PLL_MB_UD] = clk;
+
+ /* PLLP_UD */
+ clk = clk_register_fixed_factor(NULL, "pll_p_ud", "pll_p",
+ 0, 1, 1);
+ clks[TEGRA210_CLK_PLL_P_UD] = clk;
Isn't it possible to auto-enable the low-jitter bit when necessary
during of the rate-change based on a given clock-rate?
I don't think so. These new clocks (pll_mb_ud and pll_p_ud) are parents
for the emc clock, so they are needed to properly reflect the position
of the emc clock in the clock tree.
Okay, even if it's possible to do, I guess that won't be very compatible
with the firmware.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel