Re: [PATCH net-next v6 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc

Hi

On 30/03/2020 11:28, Sekhar Nori wrote:

On 30/03/20 1:06 PM, Sekhar Nori wrote:

quoted

On 30/03/20 12:45 PM, Tero Kristo wrote:

quoted

On 28/03/2020 03:53, Vladimir Oltean wrote:

quoted

Hi David,

On Fri, 27 Mar 2020 at 05:02, David Miller [off-list ref] wrote:

quoted

From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Tue, 24 Mar 2020 00:52:43 +0200

quoted

This v6 series adds basic networking support support TI K3
AM654x/J721E SoC which
have integrated Gigabit Ethernet MAC (Media Access Controller) into
device MCU
domain and named MCU_CPSW0 (CPSW2G NUSS).

   ...

Series applied, thank you.

The build is now broken on net-next:

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
(phandle_references):
/interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:

Reference to non-existent node
or label "mcu_conf"

    also defined at
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
(phandle_references):
/interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:

Reference to non-existent node
or label "phy_gmii_sel"

    also defined at
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3

As Grygorii said:

Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3
Platform
tree and provided here for testing purposes.

Yeah, I think you are missing a dependency that was applied via the K3
branch earlier. They are in linux-next now, but I am not so sure how
much that is going to help you.

You could just drop the DT patches from this merge and let me apply them
via the platform branch.

One other option would be that Dave merges your K3 tag which was sent to
ARM SoC to net-next. Its based on v5.6-rc1, has no other dependencies,
is already in linux-next, should be immutable and safe to merge. This
has the advantage that no rebase is necessary on net-next.

git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux
tags/ti-k3-soc-for-v5.7

FWIW, I was able to reproduce the build failure reported by Vladimir on
net-next, merge Tero's tag (above) cleanly into it, and see that ARM64
defconfig build on net-next succeeds after the merge.

Thank you Sekhar for checking this.

I'm very sorry for introducing this issue. I've tried hard to avoid such issue,
but still missed it (probably I have had to drop DT patches from last submission
and send them separately).

Sorry again.

-- 
Best regards,
grygorii

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel