Re: [PATCH net-next v6 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc

On 28/03/2020 03:53, Vladimir Oltean wrote:

Hi David,

On Fri, 27 Mar 2020 at 05:02, David Miller [off-list ref] wrote:

quoted

From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Tue, 24 Mar 2020 00:52:43 +0200

quoted

This v6 series adds basic networking support support TI K3 AM654x/J721E SoC which
have integrated Gigabit Ethernet MAC (Media Access Controller) into device MCU
domain and named MCU_CPSW0 (CPSW2G NUSS).

  ...

Series applied, thank you.

The build is now broken on net-next:

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
(phandle_references):
/interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
Reference to non-existent node
or label "mcu_conf"

   also defined at
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi:303.23-309.6: ERROR
(phandle_references):
/interconnect@100000/interconnect@28380000/ethernet@46000000/ethernet-ports/port@1:
Reference to non-existent node
or label "phy_gmii_sel"

   also defined at
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts:471.13-474.3

As Grygorii said:

Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3 Platform
tree and provided here for testing purposes.

Yeah, I think you are missing a dependency that was applied via the K3 
branch earlier. They are in linux-next now, but I am not so sure how 
much that is going to help you.

You could just drop the DT patches from this merge and let me apply them 
via the platform branch.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel