[PATCH net-next v5 01/11] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

The phy-gmii-sel can be only auto selected in Kconfig and now the pretty
complex Kconfig dependencies are defined for phy-gmii-sel driver, which
also need to be updated every time phy-gmii-sel is re-used for any new
networking driver.

Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all
dependencies and from networking drivers and rely on using 'imply
PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Kishon Vijay Abraham I <redacted>
Tested-by: Murali Karicheri <redacted>
---
 drivers/net/ethernet/ti/Kconfig | 1 +
 drivers/phy/ti/Kconfig          | 3 ---
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index bf98e0fa7d8b..8a6ca16eee3b 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig

@@ -53,6 +53,7 @@ config TI_CPSW
 	select MFD_SYSCON
 	select PAGE_POOL
 	select REGMAP
+	imply PHY_TI_GMII_SEL
 	---help---
 	  This driver supports TI's CPSW Ethernet Switch.
 

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 6dbe9d0b9ff3..15a3bcf32308 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig

@@ -106,11 +106,8 @@ config TWL4030_USB
 
 config PHY_TI_GMII_SEL
 	tristate
-	default y if TI_CPSW=y || TI_CPSW_SWITCHDEV=y
-	depends on TI_CPSW || TI_CPSW_SWITCHDEV || COMPILE_TEST
 	select GENERIC_PHY
 	select REGMAP
-	default m
 	help
 	  This driver supports configuring of the TI CPSW Port mode depending on
 	  the Ethernet PHY connected to the CPSW Port.

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel