Thread (9 messages) 9 messages, 2 authors, 2020-02-24
STALE2302d
Revisions (7)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v4 [diff vs current]
  6. v5 [diff vs current]
  7. v6 [diff vs current]

[PATCH v2 3/4] arm64: dts: ti: am654: Add thermal zones

From: Keerthy <j-keerthy@ti.com>
Date: 2020-02-14 06:35:20
Also in: linux-devicetree, linux-pm, lkml
Subsystem: arm/texas instruments k3 architecture, the rest · Maintainers: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds

The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU
zones

Signed-off-by: Keerthy <j-keerthy@ti.com>
---

Changes in v2:

  * Renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi

 .../dts/ti/k3-am654-industrial-thermal.dtsi   | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
new file mode 100644
index 000000000000..cdc3d40c3f60
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+mpu0_thermal: mpu0_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		mpu0_crit: mpu0_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mpu1_thermal: mpu1_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		mpu1_crit: mpu1_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mcu_thermal: mcu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		mcu_crit: mcu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help