Re: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <redacted>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 27 
+++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts

b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 388f50a..167f68ac 100644

--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts

@@ -287,6 +287,11 @@
 	vdda-pll-supply = <&vreg_l4a_0p8>;
 };

+&wifi {
+	status = "okay";

+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */

 &qspi_clk {

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi

b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..e3e8610 100644

--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -75,6 +75,11 @@
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@93900000 {
+			reg = <0 0x93900000 0 0x200000>;
+			no-map;
+		};
 	};

 	cpus {

@@ -1490,6 +1495,28 @@

 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_fw_mem>;
+			status = "disabled";
+		};
 	};

 	thermal-zones {