Re: [PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
From: Jacopo Mondi <jacopo@jmondi.org>
Date: 2020-01-06 17:09:50
Also in:
linux-devicetree, lkml
Hi Jagan, small detail, this should come -after= 3/3 in the series, am I wrong ? On Mon, Dec 30, 2019 at 05:30:20PM +0530, Jagan Teki wrote:
From: Michael Trimarchi <michael@amarulasolutions.com> Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio and phy-mode properties. So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file. Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Anyway, I've tested on my iCore 1.5 Quad starter kit and things are still working. Pending acceptance of 3/3, which seem correct to me but I cannot really judge knowing very few things about net: Tested-by: Jacopo Mondi <jacopo@jmondi.org> Thanks j
quoted hunk ↗ jump to hunk
--- Changes for v2: - new patch. arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 -- 1 file changed, 2 deletions(-)diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi index d91d46b5898f..0fd7f2e24d9c 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi@@ -25,10 +25,8 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; - phy-mode = "rmii"; status = "okay"; }; --2.18.0.321.gffc6fa0e3