arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator

Started by Stefan Mavrodiev on Nov 29, 2019

Subsystems (2)

Maintainers (4)

DORMANTno replies

open the first message on its own page

Stefan Mavrodiev

Message details and related content
Open message details and related content
A64-OLinuXino uses DCDC1 (VCC-IO) for MMC1 supply. In the dts
ALDO2 is set, which is VCC-PL. Since DCDC1 is always present, the boards
are working without a problem.

THis pacth sets the correct regulator.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index ad3559c576dd..869bb146a9ff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -140,7 +140,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_aldo2>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dldo4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help