[PATCH 3/3] arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator

From
Stefan Mavrodiev <stefan@olimex.com>
Date
2019-11-29 09:14:21
Also in
linux-devicetree, lkml
A64-OLinuXino uses DCDC1 (VCC-IO) for MMC1 supply. In the dts
ALDO2 is set, which is VCC-PL. Since DCDC1 is always present, the boards
are working without a problem.

THis pacth sets the correct regulator.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index ad3559c576dd..869bb146a9ff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -140,7 +140,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_aldo2>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dldo4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (1 message) 1 message, 1 author, last reply 2019-11-29
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help