The standard method for sdio devices connected to
an sdio interface is to define them as a child node
like we can see with wlcore.

Signed-off-by: H. Nikolaus Schaller <redacted>
Acked-by: Kalle Valo <redacted>
---
 .../bindings/net/wireless/ti,wl1251.txt       | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index bb2fcde6f7ff..f38950560982 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt

@@ -35,3 +35,29 @@ Examples:
                ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
        };
 };
+
+&mmc3 {
+       vmmc-supply = <&wlan_en>;
+
+       bus-width = <4>;
+       non-removable;
+       ti,non-removable;
+       cap-power-off-card;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc3_pins>;
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       wlan: wifi@1 {
+               compatible = "ti,wl1251";
+
+               reg = <1>;
+
+               interrupt-parent = <&gpio1>;
+               interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;  /* GPIO_21 */
+
+               ti,wl1251-has-eeprom;
+       };
+};