[RFCv2 7/9] dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
From: Neil Armstrong <hidden>
Date: 2019-08-05 12:03:18
Also in:
linux-amlogic, linux-devicetree
Subsystem:
arm/amlogic meson soc support, generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic G12A USB3 + PCIE Combo PHY over to a YAML schemas. While the original phy bindings specifies phy-supply as required, the examples and implementations makes it optional, thus phy-supply is not present in the properties and required lists. Signed-off-by: Neil Armstrong <redacted> --- .../phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 57 +++++++++++++++++++ .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 ------- 2 files changed, 57 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
new file mode 100644
index 000000000000..346f9c35427c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml@@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB3 + PCIE Combo PHY + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb3-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +examples: + - | + phy@46000 { + compatible = "amlogic,meson-g12a-usb3-pcie-phy"; + reg = <0x46000 0x2000>; + clocks = <&ref_clk>; + clock-names = "ref_clk"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <1>; + };
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
deleted file mode 100644
index 7cfc17e2df31..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+++ /dev/null@@ -1,22 +0,0 @@ -* Amlogic G12A USB3 + PCIE Combo PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy" -- #phys-cells: must be 1. The cell number is used to select the phy mode - as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE -- reg: The base address and length of the registers -- clocks: a phandle to the 100MHz reference clock of this PHY -- clock-names: must be "ref_clk" -- resets: phandle to the reset lines for the PHY control -- reset-names: must be "phy" - -Example: - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - #phy-cells = <1>; - };
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel