[RFCv2 6/9] dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml
From: Neil Armstrong <hidden>
Date: 2019-08-05 12:03:17
Also in:
linux-amlogic, linux-devicetree
Subsystem:
arm/amlogic meson soc support, generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic G12A USB2 PHY over to a YAML schemas. While the original phy bindings specifies phy-supply as required, the examples and implementations makes it optional, thus phy-supply is not in the required list of attributes. Signed-off-by: Neil Armstrong <redacted> --- .../phy/amlogic,meson-g12a-usb2-phy.yaml | 63 +++++++++++++++++++ .../bindings/phy/meson-g12a-usb2-phy.txt | 22 ------- 2 files changed, 63 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
new file mode 100644
index 000000000000..51254b4e65dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB2 PHY + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +properties: + compatible: + enum: + - amlogic,meson-g12a-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: + maxItems: 1 + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +examples: + - | + phy@36000 { + compatible = "amlogic,meson-g12a-usb2-phy"; + reg = <0x36000 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + };
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
deleted file mode 100644
index a6ebc3dea159..000000000000
--- a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
+++ /dev/null@@ -1,22 +0,0 @@ -* Amlogic G12A USB2 PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-g12a-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- clocks: a phandle to the clock of this PHY -- clock-names: must be "xtal" -- resets: a phandle to the reset line of this PHY -- reset-names: must be "phy" -- phy-supply: see phy-bindings.txt in this directory - -Example: - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - };
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel