Thread (7 messages) 7 messages, 3 authors, 2019-07-30

Re: [PATCH v3 1/2] dt-bindings: i3c: Document MediaTek I3C master bindings

From: Qii Wang <qii.wang@mediatek.com>
Date: 2019-07-27 01:23:55
Also in: linux-devicetree, linux-i3c, linux-mediatek, lkml

On Wed, 2019-07-24 at 14:21 -0600, Rob Herring wrote:
On Tue, Jul 09, 2019 at 09:09:21PM +0800, Qii Wang wrote:
quoted
Document MediaTek I3C master DT bindings.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 .../devicetree/bindings/i3c/mtk,i3c-master.txt     |   48 ++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
diff --git a/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
new file mode 100644
index 0000000..d32eda6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
@@ -0,0 +1,48 @@
+Bindings for MediaTek I3C master block
+=====================================
+
+Required properties:
+--------------------
+- compatible: shall be "mediatek,i3c-master"
Needs to be SoC specific.
We hope that the SOCs will use the same driver and try to avoid big
changes. If there are inevitable changes in the future, then we will
modify the compatible to be SoC specific. cdns,i3c-master.txt is not SoC
specific either.
quoted
+- reg: physical base address of the controller and apdma base, length of
+  memory mapped region.
+- reg-names: shall be "main" for master controller and "dma" for apdma.
+- interrupts: the interrupt line connected to this I3C master.
+- clocks: shall reference the i3c and apdma clocks.
+- clock-names: shall include "main" and "dma".
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 3
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+	i3c0: i3c@1100d000 {
+		compatible = "mediatek,i3c-master";
+		reg = <0x1100d000 0x1000>,
+		      <0x11000300 0x80>;
+		reg-names = "main", "dma";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_I3C0>,
+			 <&infracfg CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <3>;
+		#size-cells = <0>;
+		i2c-scl-hz = <100000>;
+
+		nunchuk: nunchuk@52 {
+			compatible = "nintendo,nunchuk";
+			reg = <0x52 0x0 0x10>;
+		};
+	};
-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help