Thread (7 messages) 7 messages, 3 authors, 2019-07-30

Re: [PATCH v3 1/2] dt-bindings: i3c: Document MediaTek I3C master bindings

From: Rob Herring <robh@kernel.org>
Date: 2019-07-24 20:21:26
Also in: linux-devicetree, linux-i3c, linux-mediatek, lkml

On Tue, Jul 09, 2019 at 09:09:21PM +0800, Qii Wang wrote:
quoted hunk ↗ jump to hunk
Document MediaTek I3C master DT bindings.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 .../devicetree/bindings/i3c/mtk,i3c-master.txt     |   48 ++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
diff --git a/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
new file mode 100644
index 0000000..d32eda6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
@@ -0,0 +1,48 @@
+Bindings for MediaTek I3C master block
+=====================================
+
+Required properties:
+--------------------
+- compatible: shall be "mediatek,i3c-master"
Needs to be SoC specific.
+- reg: physical base address of the controller and apdma base, length of
+  memory mapped region.
+- reg-names: shall be "main" for master controller and "dma" for apdma.
+- interrupts: the interrupt line connected to this I3C master.
+- clocks: shall reference the i3c and apdma clocks.
+- clock-names: shall include "main" and "dma".
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 3
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+	i3c0: i3c@1100d000 {
+		compatible = "mediatek,i3c-master";
+		reg = <0x1100d000 0x1000>,
+		      <0x11000300 0x80>;
+		reg-names = "main", "dma";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_I3C0>,
+			 <&infracfg CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <3>;
+		#size-cells = <0>;
+		i2c-scl-hz = <100000>;
+
+		nunchuk: nunchuk@52 {
+			compatible = "nintendo,nunchuk";
+			reg = <0x52 0x0 0x10>;
+		};
+	};
-- 
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help