[PATCH 01/17] ARM: dts: aspeed-g5: Move EDAC node to APB
From: Andrew Jeffery <hidden>
Date: 2019-07-26 05:40:10
Also in:
linux-aspeed, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Previously the register interface was not attached to any internal bus, which is not correct - it lives on the APB. Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <redacted> --- arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5b1ca265c2ce..7723afc7c249 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi@@ -47,13 +47,6 @@ reg = <0x80000000 0>; }; - edac: sdram@1e6e0000 { - compatible = "aspeed,ast2500-sdram-edac"; - reg = <0x1e6e0000 0x174>; - interrupts = <0>; - status = "disabled"; - }; - ahb { compatible = "simple-bus"; #address-cells = <1>;
@@ -206,6 +199,13 @@ #size-cells = <1>; ranges; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + syscon: syscon@1e6e2000 { compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel