[PATCH v3 6/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding
From: Torsten Duwe <hidden>
Date: 2019-07-22 15:12:06
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed for portable devices. Add a binding document for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Torsten Duwe <redacted> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- .../devicetree/bindings/display/bridge/anx6345.txt | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
new file mode 100644
index 000000000000..0af092d101c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt@@ -0,0 +1,57 @@ +Analogix ANX6345 eDP Transmitter +-------------------------------- + +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for +portable devices. + +Required properties: + + - compatible : "analogix,anx6345" + - reg : I2C address of the device + - reset-gpios : Which GPIO to use for reset (active low) + - dvdd12-supply : Regulator for 1.2V digital core power. + - dvdd25-supply : Regulator for 2.5V digital core power. + - Video port 0 for LVTTL input, using the DT bindings defined in [1]. + +Optional properties: + + - Video port 1 for eDP output (panel or connector) using the DT bindings + defined in [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + +anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + anx6345_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + anx6345_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +};
--
2.16.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel