[PATCH v2 2/2] arm64: dts: imx8mq-librem5: Enable MIPI D-PHY
From: Guido Günther <agx@sigxcpu.org>
Date: 2019-07-15 10:43:15
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
This enables the Mixel MIPI D-PHY on the Librem 5 devkit Signed-off-by: Guido Günther <agx@sigxcpu.org> Acked-by: Angus Ainslie (Purism) <redacted> --- arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 5179e22f5126..683a11035643 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts@@ -174,6 +174,10 @@ assigned-clock-rates = <786432000>, <722534400>; }; +&dphy { + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel