Thread (64 messages) 64 messages, 4 authors, 2019-07-26
STALE2552d
Revisions (4)
  1. rfc [diff vs current]
  2. v1 current
  3. v2 [diff vs current]
  4. v3 [diff vs current]

[PATCH RFC v1 1/7] serial: imx: fix locking in set_termios()

From: Sergey Organov <hidden>
Date: 2019-06-20 14:48:45
Also in: linux-serial
Subsystem: the rest, tty layer and serial drivers · Maintainers: Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby

imx_uart_set_termios() called imx_uart_rts_active(), or
imx_uart_rts_inactive() before taking port->port.lock.

As a consequence, sport->port.mctrl that these functions modify
could have been changed without holding port->port.lock.

Moved locking of port->port.lock above the calls to fix the issue.

Signed-off-by: Sergey Organov <redacted>
---
 drivers/tty/serial/imx.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dff75dc..1055124 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -383,6 +383,7 @@ static void imx_uart_ucrs_restore(struct imx_port *sport,
 }
 #endif
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
@@ -391,6 +392,7 @@ static void imx_uart_rts_active(struct imx_port *sport, u32 *ucr2)
 	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
 }
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 &= ~UCR2_CTSC;
@@ -400,6 +402,7 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
 	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
 }
 
+/* called with port.lock taken and irqs caller dependent */
 static void imx_uart_rts_auto(struct imx_port *sport, u32 *ucr2)
 {
 	*ucr2 |= UCR2_CTSC;
@@ -1550,6 +1553,16 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
 		old_csize = CS8;
 	}
 
+	del_timer_sync(&sport->timer);
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+	quot = uart_get_divisor(port, baud);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
 	if ((termios->c_cflag & CSIZE) == CS8)
 		ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
 	else
@@ -1593,16 +1606,6 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
 			ucr2 |= UCR2_PROE;
 	}
 
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
-	quot = uart_get_divisor(port, baud);
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-
 	sport->port.read_status_mask = 0;
 	if (termios->c_iflag & INPCK)
 		sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
-- 
2.10.0.1.g57b01a3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help