Thread (9 messages) 9 messages, 2 authors, 2019-07-09
STALE2544d
Revisions (7)
  1. v1 [diff vs current]
  2. v3 [diff vs current]
  3. v4 [diff vs current]
  4. v5 [diff vs current]
  5. v5 [diff vs current]
  6. v6 current
  7. v7 [diff vs current]

[PATCH v6 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

From: Gregory CLEMENT <gregory.clement@bootlin.com>
Date: 2019-06-19 14:16:31
Also in: linux-clk, linux-devicetree, lkml
Subsystem: arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds

Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 2baafe12ebd4..472211159979 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 91dad7e4ee59..ed039aa8188f 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -280,6 +280,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@0 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x278 0xa30>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help