[RFC PATCH 02/30] dt-bindings: PCI: cadence: Add binding to reset PERST#
From: Kishon Vijay Abraham I <hidden>
Date: 2019-06-04 13:17:12
Also in:
linux-devicetree, linux-omap, linux-pci, linux-rockchip, lkml
Subsystem:
open firmware and flattened device tree bindings, pci driver for cadence pcie ip, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Add binding to reset PERST# connected to a GPIO. Signed-off-by: Kishon Vijay Abraham I <redacted> --- Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
index f02cccd1e0c5..cbd16519ae13 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt@@ -28,6 +28,7 @@ Optional properties: than one in the list. If only one PHY listed it must manage all lanes. - phy-names: List of names to identify the PHY. - iommu-map: As specified in Documentation/devicetree/bindings/pci/pci-iommu.txt +- reset-gpios: GPIO specifier for the PERST# signal Example:
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel