Thread (26 messages) 26 messages, 4 authors, 2019-06-14

Re: [PATCH v3 10/12] arm64: dts: allwinner: h6: Add IR receiver node

From: Clément Péron <hidden>
Date: 2019-05-30 22:25:46
Also in: linux-devicetree, linux-media, lkml

Hi Ondrej,

On Thu, 30 May 2019 at 16:55, Ondřej Jirman [off-list ref] wrote:
Hello Clément,

On Tue, May 28, 2019 at 06:14:38PM +0200, Clément Péron wrote:
quoted
Allwinner H6 IR is similar to A31 and can use same driver.

Add support for it.

Signed-off-by: Clément Péron <redacted>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 16c5c3d0fd81..649cbdfe452e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -647,6 +647,25 @@
                              pins = "PL0", "PL1";
                              function = "s_i2c";
                      };
+
+                     r_ir_rx_pin: r-ir-rx-pin {
+                             pins = "PL9";
+                             function = "s_cir_rx";
+                     };
+             };
+
+             r_ir: ir@7040000 {
+                             compatible = "allwinner,sun50i-h6-ir",
+                                          "allwinner,sun6i-a31-ir";
+                             reg = <0x07040000 0x400>;
+                             interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+                             clocks = <&r_ccu CLK_R_APB1_IR>,
+                                      <&r_ccu CLK_IR>;
+                             clock-names = "apb", "ir";
+                             resets = <&r_ccu RST_R_APB1_IR>;
+                             pinctrl-names = "default";
+                             pinctrl-0 = <&r_ir_rx_pin>;
+                             status = "disabled";
              };
Please make a comment here, that this is known broken on some boards and may
result IRQ flood if enabled. Otherwise noone will know.
I'm planning to send a v4 next week with the IRQ_NONE return as Maxime
suggested it.
https://github.com/clementperon/linux/tree/h6_ir_v4

But maybe we could also use the bit 5 of the IRQ status.

Regards, Clement
thanks,
        o.
quoted
              r_i2c: i2c@7081400 {
--
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help