Re: [RFC PATCH 3/5] mtd: Add support for Hyperbus memory devices

From
Vignesh R <vigneshr@ti.com>
Date
2019-02-26 10:26:15
Also in
linux-devicetree, lkml
Reply to
Sergei Shtylyov, 2019-02-25

On 26/02/19 1:03 AM, Sergei Shtylyov wrote:
On 02/25/2019 09:21 PM, Vignesh R wrote:

[...]
quoted
quoted
quoted
HyperBus specification can be found at[1]
HyperFlash datasheet can be found at[2]

[1] https://www.cypress.com/file/213356/download
[2] https://www.cypress.com/file/213346/download
[3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf
    Table 12-5741. HyperFlash Access Sequence

Signed-off-by: Vignesh R <vigneshr@ti.com>
[...]
quoted
quoted
quoted
diff --git a/drivers/mtd/hyperbus/core.c b/drivers/mtd/hyperbus/core.c
new file mode 100644
index 000000000000..d3d44aab7503
--- /dev/null
+++ b/drivers/mtd/hyperbus/core.c
[...]
quoted
quoted
quoted
+int hb_register_device(struct hb_device *hbdev)
+{
+	struct resource res;
+	struct device *dev;
+	struct device_node *np;
+	struct map_info *map;
+	struct hb_ops *ops;
+	int err;
+
+	if (!hbdev || !hbdev->dev || !hbdev->np) {
+		pr_err("hyperbus: please fill all the necessary fields!\n");
+		return -EINVAL;
+	}
+
+	np = hbdev->np;
+	if (!of_device_is_compatible(np, "cypress,hyperflash"))
+		return -ENODEV;
+
+	hbdev->memtype = HYPERFLASH;
+
+	if (of_address_to_resource(np, 0, &res))
    Isn't the direct mapping property of the HF controller, not of HyperFlash
itself?
As I said in the cover letter, I could not find many examples of HF
controllers, but couple of them that I studied provide MMIO access to
flash. So, reg property of flash node would represent local address on
the HyperBus and controller node would set up ranges properly to provide
translation from CS to SoC address space.
For example see patch 4/5 where reg property would indicate CS and Size
of flash. This scheme is similar to whats described here [1]
HBMC controllers usually have different MMIO regions to access flashes
connected to different CS. So using ranges for address translation along
with flash node describing local address works pretty well.

My understanding is that this part of code will be common for most MMIO
based HB controllers and hence made part of core layer. But, if
controllers uses different IO space for read vs write, then this needs a
bit of thinking. In that case, mapping needs to be moved to controller
drivers.

[1]https://elinux.org/Device_Tree_Usage#Ranges_.28Address_Translation.29
quoted
quoted
+		return -EINVAL;
+
+	dev = hbdev->dev;
+	map = &hbdev->map;
+	map->size = resource_size(&res);
+	map->virt = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(map->virt))
+		return PTR_ERR(map->virt);
+
+	map->name = dev_name(dev);
+	map->bankwidth = 2;
+
+	simple_map_init(map);
   It's not that simple, I'm afraid -- e.g. Renesas RPC-IF has read and write
mappings in the separate memory resources.
Hmm, could you point me to public datasheet of the controller?
   See chapter 20 in [1]. Note that it's not the same SoC I'm developing for (R-Car
gen3 family, with NDA docs) but should be mostly the same RPC-IF core.

[1] https://www.renesas.com/us/en/doc/products/mpumcu/doc/rz/r01uh0746ej0200-rza2m.pdf?key=74862185b5e22ad09e648d21a35de615
Thanks for the info!
quoted
simple_map_init() provides default implementation for map operations
which is overridden, if hb_ops is populated.
I think, Renesas RPC-IF can populate custom hb_ops struct and use
appropriate MMIO base for read vs write, while still reusing the map
framework. Wouldnt that work?
   It probably would...

Looking at above link, I see there are two HBMC controllers on Renesas
SoC. One is a dedicated HBMC controller(chapter 21) very similar to that
on TI SoC and a SPI Multi I/O Bus Controller (chapter 20) that also
supports Hyperbus protocol.

AFAICS, passing custom hb_ops is good enough to support both HW needs.
Let me know if something is missing. I would greatly appreciate if you
could test this series with your HW.



-- 
Regards
Vignesh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (25 messages) 25 messages, 4 authors, last reply 2019-02-27
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help