[RFC PATCH 2/5] dt-bindings: mtd: Add binding documentation for Hyperbus memory devices

From
Vignesh R <vigneshr@ti.com>
Date
2019-02-19 06:35:55
Also in
linux-devicetree, lkml
Reply to
Vignesh R, 2019-02-19
Add DT binding documentation for Hyperbus memory devices. For now only
Hyperflash is supported.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
new file mode 100644
index 000000000000..cb408f80b868
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt
@@ -0,0 +1,6 @@
+Bindings for Hyperflash NOR flash chips compliant with Cypress Hyperbus
+specification and supports Cypress CFI specification 1.5 command set.
+
+Required properties:
+- compatible : "cypress,hyperflash" for Hyperflash NOR chips
+- reg : Address where flash's memory mapped space
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (25 messages) 25 messages, 4 authors, last reply 2019-02-27
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help