[PATCHv3 15/27] dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional
flat view
STALE2801d
REVIEWED: 8 (7M)
From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
Date: 2019-01-29 08:10:11
Also in:
linux-devicetree, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Revision v1 of 3 in this series; 3 review trailers (1 from subsystem maintainers).
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Change the "gpio_slave" and "apb_csr" to optional, the "gpio_slave" is not used in current code, and "apb_csr" is not used by some platforms. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Acked-by: Subrahmanya Lingappa <redacted> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> --- V3: - No change Documentation/devicetree/bindings/pci/mobiveil-pcie.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index a618d4787dd7..64156993e052 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt@@ -10,8 +10,10 @@ Required properties: interrupt source. The value must be 1. - compatible: Should contain "mbvl,gpex40-pcie" - reg: Should contain PCIe registers location and length + Mandatory: "config_axi_slave": PCIe controller registers "csr_axi_slave" : Bridge config registers + Optional: "gpio_slave" : GPIO registers to control slot power "apb_csr" : MSI registers
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel