Thread (10 messages) 10 messages, 2 authors, 2019-01-21
STALE2682d
Revisions (4)
  1. v3 [diff vs current]
  2. v3 current
  3. v4 [diff vs current]
  4. v5 [diff vs current]

[PATCH v3 5/6] dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver

From: Nava kishore Manne <hidden>
Date: 2019-01-20 17:40:21
Also in: linux-devicetree, lkml
Subsystem: nvmem framework, open firmware and flattened device tree bindings, the rest · Maintainers: Srinivas Kandagatla, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Add documentation to describe Xilinx ZynqMP nvmem driver
bindings.

Signed-off-by: Nava kishore Manne <redacted>
---
Changes for v3:
		-Added nvmem node as child of FW. Since nvmem driver is a provider.
  
 .../bindings/nvmem/xlnx,zynqmp-nvmem.txt      | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
new file mode 100644
index 000000000000..2043c8284f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
@@ -0,0 +1,47 @@
+--------------------------------------------------------------------------
+=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
+--------------------------------------------------------------------------
+The nvmem_firmware node provides access to the hardware related data
+like soc revision, IDCODE... etc, By using the firmware interface.
+
+Required properties:
+- compatible: should be "xlnx,zynqmp-nvmem-fw"
+
+= Data cells =
+Are child nodes of silicon id, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+-------
+ Example
+-------
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		nvmem_firmware {
+			compatible = "xlnx,zynqmp-nvmem-fw";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Data cells */
+			soc_revision: soc_revision {
+				reg = <0x0 0x4>;
+			};
+		};
+	};
+};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+	pcap {
+		...
+
+		nvmem-cells = <&soc_revision>;
+		nvmem-cell-names = "soc_revision";
+
+		...
+	};
+
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help