[PATCH v3 2/6] dt-bindings: soc: Add ZynqMP PM bindings
From: Nava kishore Manne <hidden>
Date: 2019-01-20 17:40:15
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, system reset/shutdown drivers, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sebastian Reichel, Linus Torvalds
From: Rajan Vaja <redacted> Add documentation to describe Xilinx ZynqMP power management bindings. Signed-off-by: Rajan Vaja <redacted> Signed-off-by: Jolly Shah <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes for v3: -None. .../power/reset/xlnx,zynqmp-power.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 000000000000..d366f1eb623a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt@@ -0,0 +1,25 @@ +-------------------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management +-------------------------------------------------------------------- +The zynqmp-power node describes the power management configurations. +It will control remote suspend/shutdown interfaces. + +Required properties: + - compatible: Must contain: "xlnx,zynqmp-power" + - interrupts: Interrupt specifier + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; +};
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel