[PATCH v2 1/2] dt-bindings: reset: Add document for Broadcom STB reset controller
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2019-01-15 18:44:35
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds
Add a binding document for the Broadcom STB reset controller, also known as SW_INIT-style reset controller. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../bindings/reset/brcm,brcmstb-reset.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
new file mode 100644
index 000000000000..6e5341b4f891
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt@@ -0,0 +1,27 @@ +Broadcom STB SW_INIT-style reset controller +=========================================== + +Broadcom STB SoCs have a SW_INIT-style reset controller with separate +SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit +reset lines. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: should be brcm,brcmstb-reset +- reg: register base and length +- #reset-cells: must be set to 1 + +Example: + + reset: reset-controller@8404318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x8404318 0x30>; + #reset-cells = <1>; + }; + + ðernet_switch { + resets = <&reset>; + reset-names = "switch"; + };
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel