To keep aligned with arm64, remove the unnecessary SOC_IMX8MQ and use
ARCH_MXC instead.

Signed-off-by: Abel Vesa <redacted>
---
 arch/arm64/Kconfig.platforms           | 8 --------
 arch/arm64/boot/dts/freescale/Makefile | 2 +-
 drivers/clk/imx/Makefile               | 3 ++-
 drivers/phy/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/Kconfig      | 2 +-
 drivers/soc/imx/Kconfig                | 2 +-
 6 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms

b/arch/arm64/Kconfig.platforms
index 7e1545a..318dbb9 100644

--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms

@@ -148,14 +148,6 @@ config ARCH_MXC

 	  This enables support for the ARMv8 based SoCs in the
 	  NXP i.MX family.
 
-config SOC_IMX8MQ
-	bool "i.MX8MQ support"
-	depends on ARCH_MXC
-	select ARM64_ERRATUM_843419
-	select ARM64_ERRATUM_845719
-	help
-	  This enables support for the i.MX8MQ SoC.
-

 config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB

diff --git a/arch/arm64/boot/dts/freescale/Makefile

b/arch/arm64/boot/dts/freescale/Makefile
index 0001361..f9be242 100644

--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile

@@ -19,4 +19,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-

rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
-dtb-$(CONFIG_SOC_IMX8MQ) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 5c0b11e..62a1882 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile

@@ -34,5 +34,6 @@ obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o

 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
 obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
-obj-$(CONFIG_SOC_IMX8MQ) += clk-imx8mq.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
+
+obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o

diff --git a/drivers/phy/freescale/Kconfig

b/drivers/phy/freescale/Kconfig
index f050bd4..923c0ef 100644

--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig

@@ -2,4 +2,4 @@ config PHY_FSL_IMX8MQ_USB

 	tristate "Freescale i.MX8M USB3 PHY"
 	depends on OF && HAS_IOMEM
 	select GENERIC_PHY
-	default SOC_IMX8MQ
+	default ARCH_MXC

diff --git a/drivers/pinctrl/freescale/Kconfig

b/drivers/pinctrl/freescale/Kconfig
index 2d6db43..9874a16 100644

--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig

@@ -123,7 +123,7 @@ config PINCTRL_IMX7ULP

 
 config PINCTRL_IMX8MQ
 	bool "IMX8MQ pinctrl driver"
-	depends on SOC_IMX8MQ
+	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
 	  Say Y here to enable the imx8mq pinctrl driver

diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index 2112d18..7ffbb6b 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig

@@ -2,7 +2,7 @@ menu "i.MX SoC drivers"

 
 config IMX_GPCV2_PM_DOMAINS
 	bool "i.MX GPCv2 PM domains"
-	depends on SOC_IMX7D || SOC_IMX8MQ || (COMPILE_TEST && OF)
+	depends on SOC_IMX7D || ARCH_MXC || (COMPILE_TEST && OF)
 	depends on PM
 	select PM_GENERIC_DOMAINS
 	default y if SOC_IMX7D