RE: [PATCH 2/3] clk: imx: Build imx8mq clocks on arm64 only
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: 2018-12-13 13:24:26
Also in:
linux-clk, lkml
-----Original Message----- From: Abel Vesa Sent: Thursday, December 13, 2018 9:18 PM Subject: [PATCH 2/3] clk: imx: Build imx8mq clocks on arm64 only The composite-8m, frac and sccg clocks are not used by any arm32 IMX SoC, therefore build them only on arm64. CONFIG_ARCH_MXC is arm64 only, use that.
CONFIG_ARCH_MXC is not ARM64 only.
quoted hunk ↗ jump to hunk
Signed-off-by: Abel Vesa <redacted> --- drivers/clk/imx/Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index62a1882..cc95744 100644--- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile@@ -3,13 +3,11 @@ obj-y += \ clk.o \ clk-busy.o \ - clk-composite-8m.o \ clk-cpu.o \ clk-composite-7ulp.o \ clk-divider-gate.o \ clk-fixup-div.o \ clk-fixup-mux.o \ - clk-frac-pll.o \ clk-gate-exclusive.o \ clk-gate2.o \ clk-pfd.o \@@ -17,8 +15,7 @@ obj-y += \ clk-pllv1.o \ clk-pllv2.o \ clk-pllv3.o \ - clk-pllv4.o \ - clk-sccg-pll.o + clk-pllv4.o obj-$(CONFIG_SOC_IMX1) += clk-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o @@ -36,4 +33,7 @@obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o obj-$(CONFIG_SOC_VF610) += clk-vf610.o -obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o +obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o \ + clk-composite-8m.o \ + clk-frac-pll.o \ + clk-sccg-pll.o
I think you may create a CLK_IMX8MQ as I said in other mail for IMX8QXP. Regards Dong Aisheng
-- 2.7.4
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel