Re: [PATCH 10/14] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description
From: "Sugaya, Taichi" <sugaya.taichi@socionext.com>
Date: 2018-12-06 08:29:50
Also in:
linux-clk, linux-devicetree, linux-serial, lkml
Hi, Thank you for your comments. On 2018/12/05 8:11, Rob Herring wrote:
On Mon, Nov 19, 2018 at 10:02:12AM +0900, Sugaya Taichi wrote:quoted
Add DT bindings document for Milbeaut M10V pinctrl. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> --- .../pinctrl/socionext,milbeaut-pinctrl.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txtdiff --git a/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt new file mode 100644 index 0000000..7469189 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt@@ -0,0 +1,33 @@ +Milbeaut SoCs pin controller + +Required properties: +- compatible: should be one of the following: + "socionext,milbeaut-m10v-pinctrl" - for m10v SoC +- reg: offset and length of the register set. +- reg-names: should be "pinctrl", "exiu". +- gpio-cells; should be 2.#gpio-cells gpio-controller?
Ah yes. I forgot to add it. Add it.
quoted
+- interrupt-cells: should be 2.#interrupt-cells interrupt-controller?
Add it also. Thanks, Sugaya Taichi
quoted
+- clocks: phandle to the input clock. +- interrupts: three interrupts specifer. +- interrupt-names: corresponds "interrupts" factor. + +Example: + pinctrl: pinctrl@1d022000 { + compatible = "socionext,milbeaut-m10v-pinctrl"; + reg = <0x1d022000 0x1000>, + <0x1c26f000 0x1000>; + reg-names = "pinctrl", "exiu"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&dummy_clk>; + interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>, + <0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>, + <0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>, + <0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>; + interrupt-names = "pin-48", "pin-49", "pin-50", "pin-51", + "pin-52", "pin-53", "pin-54", "pin-55", + "pin-56", "pin-57", "pin-58", "pin-59", + "pin-60", "pin-61", "pin-62", "pin-63"; + } -- 1.9.1
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel