Re: [PATCH 11/14] pinctrl: milbeaut: Add Milbeaut M10V pinctrl
From: Masahiro Yamada <hidden>
Date: 2018-12-04 11:24:25
Also in:
linux-clk, linux-devicetree, linux-serial, lkml
Hi Sugaya-san On Mon, Nov 19, 2018 at 10:01 AM Sugaya Taichi [off-list ref] wrote:
Add Milbeaut M10V pinctrl. The M10V has the pins that can be used GPIOs or take multiple other functions. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
This patch was sent to: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org Unfortunately, the most important ML linux-gpio@vger.kernel.org was not addressed. The pinctrl maintainer may not notice this patch.
quoted hunk ↗ jump to hunk
diff --git a/drivers/pinctrl/pinctrl-m10v.c b/drivers/pinctrl/pinctrl-m10v.c new file mode 100644 index 0000000..d4ca713 --- /dev/null +++ b/drivers/pinctrl/pinctrl-m10v.c@@ -0,0 +1,765 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Socionext Ltd. + * Copyright (C) 2015 Linaro Ltd. + * Author: Jassi Brar <jaswinder.singh@linaro.org>
My company name is "Socionext Inc." instead of "Socionext Ltd."
+static struct platform_driver m10v_pinctrl_driver = {
+ .probe = m10v_pinctrl_probe,
+ .driver = {
+ .name = "m10v-pinctrl",
+ .of_match_table = m10v_pmatch,
+ },
+};
+
+static int __init m10v_pinctrl_init(void)
+{
+ return platform_driver_register(&m10v_pinctrl_driver);
+}
+arch_initcall(m10v_pinctrl_init);Can't it be builtin_platform_driver()? Which device requires this to be arch_initcall()? -- Best Regards Masahiro Yamada _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel