[PATCH 26/40] arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

The VIN driver bindings dictates fixed numbering for VIN endpoints connected
to CSI-2 endpoints, even when a single endpoint exists.

Without proper endpoint numbering the VIN driver fails to probe.

Based on a patch in BSP from Koji Matsuoka [off-list ref]

Fixes: ec70407ae7d7 ("arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes")
Signed-off-by: Koji Matsuoka <redacted>
Signed-off-by: Takeshi Kihara <redacted>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <redacted>
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index e0092fb27ec0..a2524fc138a2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi

@@ -1011,9 +1011,13 @@
 				#size-cells = <0>;
 
 				port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
 					reg = <1>;
 
-					vin4csi40: endpoint {
+					vin4csi40: endpoint at 2 {
+						reg = <2>;
 						remote-endpoint= <&csi40vin4>;
 					};
 				};

@@ -1035,9 +1039,13 @@
 				#size-cells = <0>;
 
 				port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
 					reg = <1>;
 
-					vin5csi40: endpoint {
+					vin5csi40: endpoint at 2 {
+						reg = <2>;
 						remote-endpoint= <&csi40vin5>;
 					};
 				};

-- 
2.11.0