Stefan Wahren [off-list ref] writes:

Hi Eric,

quoted

Eric Anholt [off-list ref] hat am 16. November 2018 um 22:23 geschrieben:


Stefan Wahren [off-list ref] writes:

quoted

This patch series adds support for the brand new Raspberry Pi 3 A+ .

Changes in V2:
- add missing Makefile change for arm64

Stefan Wahren (3):
  dt-bindings: bcm: Add Raspberry Pi 3 A+
  ARM: dts: add Raspberry Pi 3 A+
  arm64: dts: broadcom: Add reference to RPi 3 A+

Looks pretty reasonable, but I couldn't verify any of the contents --
the firmware repo doesn't have a DT file for it, and the published
schematics don't show most of the GPIO connections (sigh).  How did you
write/test this?

i have a Raspberry Pi 3 A+ and the firmware seems to use a runtime
generated DT. So i dumped the DTS of a 3 A+ and a 3 B+ from
procfs. Based on the procfs diff i modified the upstream 3B+ source to
get a 3A+ .

Sounds good to me.  Comparing to the pi3b+, it looks like the changes I
would expect for the board, so the series is:

Reviewed-by: Eric Anholt <redacted>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181119/d0dde766/attachment.sig>