[PATCH v4] usb/mtu3: power down device ip at setup
From: Hsin-Yi, Wang <hidden>
Date: 2018-11-29 03:16:35
Also in:
linux-mediatek, linux-usb, lkml
Subsystem:
mediatek usb3 drd ip driver, the rest, usb subsystem · Maintainers:
Chunfeng Yun, Linus Torvalds, Greg Kroah-Hartman
Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip, so host ip sleep will fail at ssusb_host_disable. Power down device ip at ssusb_host_setup. Signed-off-by: Hsin-Yi, Wang <redacted> --- ChangeLog: V3->V4: *update comment --- drivers/usb/mtu3/mtu3_plat.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 46551f6d16fd..e086630e41a9 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c@@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); udelay(1); mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); + + /* + * device ip may be powered on in firmware/BROM stage before entering + * kernel stage; + * power down device ip, otherwise ip-sleep will fail when working as + * host only mode + */ + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); } /* ignore the error if the clock does not exist */
--
2.18.1