[PATCH v3 21/22] arm64: dts: ls104x: make dma-coherent global to the SoC
From: laurentiu.tudor@nxp.com (laurentiu.tudor at nxp.com)
Date: 2018-10-10 12:08:30
Also in:
linux-devicetree, lkml, netdev
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
From: Laurentiu Tudor <laurentiu.tudor@nxp.com> These SoCs are really completely dma coherent in their entirety so add the dma-coherent property at the soc level in the device tree and drop the instances where it's specifically added to a few select devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 5 +---- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 + 2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ccadc40a36f4..9fb3ac0fa87c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi@@ -215,6 +215,7 @@ #size-cells = <2>; ranges; dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking at 1ee1000 { compatible = "fsl,ls1043a-clockgen";
@@ -680,7 +681,6 @@ reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; clocks = <&clockgen 4 0>; - dma-coherent; }; msi1: msi-controller1 at 1571000 {
@@ -715,7 +715,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; iommu-map = <0 &mmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>;
@@ -741,7 +740,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>;
@@ -767,7 +765,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index a12d33362554..f19cf6087235 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi@@ -188,6 +188,7 @@ #size-cells = <2>; ranges; dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; ddr: memory-controller at 1080000 { compatible = "fsl,qoriq-memory-controller";
--
2.17.1