[PATCH v2] ARM: dts: Add support for Liebherr's BK4 device (vf610 based)
From: lukma@denx.de (Lukasz Majewski)
Date: 2018-10-08 12:26:00
Also in:
linux-devicetree, lkml
Dear All,
This commit adds DTS support for BK4 device from Liebherr. It uses vf610 SoC from NXP.
Gentle ping on this patch...
quoted hunk ↗ jump to hunk
Signed-off-by: Lukasz Majewski <lukma@denx.de> --- Changes for v2: - Rename enet_ext and audio_ext oscillator names - Move regulators from simple-bus (and rename to reg_3p3v: regulator-3p3v) - Add stdout-path property to chosen node - Move iomuxc node to the end (as it is so large) - Sort with alphabetical order - Rename the default pinctrl to "hog" - Move LED pins definition from "hog" to "led" group - Add more descriptive names to default pins pinmux definition - Use spi-slave property to describe node working in this mode - Rename the spidev3 node to slave - Introduce new compatible name (lwn,bk4) for spidev driver (to avoid confusion) - Update some compatibles to match current kernel --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-bk4.dts | 499 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 500 insertions(+) create mode 100644 arch/arm/boot/dts/vf610-bk4.dtsdiff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87c33..e6f159895fa9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ + vf610-bk4.dtb \ vf610-colibri-eval-v3.dtb \ vf610m4-colibri.dtb \ vf610-cosmic.dtb \diff --git a/arch/arm/boot/dts/vf610-bk4.dtsb/arch/arm/boot/dts/vf610-bk4.dts new file mode 100644 index 000000000000..78c5723d6f64--- /dev/null +++ b/arch/arm/boot/dts/vf610-bk4.dts@@ -0,0 +1,499 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Liebherr BK4 controller"; + compatible = "lwn,bk4", "fsl,vf610"; + + chosen { + stdout-path = &uart1; + }; + + memory at 80000000 { + reg = <0x80000000 0x8000000>; + }; + + audio_ext: oscillator-audio { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + enet_ext: oscillator-ethernet { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + /* LED D5 */ + led0: heartbeat { + label = "heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vcc_3v3_mcu: regulator-vcc_3v3_mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; +}; + +&dspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + bus-num = <0>; + status = "okay"; + + spidev0 at 0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + fsl,spi-cs-sck-delay = <200>; + fsl,spi-sck-cs-delay = <400>; + }; +}; + +&dspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi3>; + bus-num = <3>; + status = "okay"; + spi-slave; + + slave at 0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy at 1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec1 { + phy-mode = "rmii"; + phy-handle = <ðphy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethphy1: ethernet-phy at 1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom: eeprom at 50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc: rtc at 68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; + +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand at 0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + flash0: n25q128a13 at 0 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + reg = <0>; + }; + + flash1: n25q128a13 at 1 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <2>; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* One_Wire_PSU_EN */ + VF610_PAD_PTC29__GPIO_1020x1183 + /* SPI ENABLE */ + VF610_PAD_PTB26__GPIO_96 0x1183 + /* EB control */ + VF610_PAD_PTE14__GPIO_119 0x1183 + VF610_PAD_PTE4__GPIO_109 0x1181 + /* Feedback_Lines */ + VF610_PAD_PTC31__GPIO_104 0x1181 + VF610_PAD_PTA7__GPIO_134 0x1181 + VF610_PAD_PTD9__GPIO_88 0x1181 + VF610_PAD_PTE1__GPIO_106 0x1183 + VF610_PAD_PTB2__GPIO_24 0x1181 + VF610_PAD_PTB3__GPIO_25 0x1181 + VF610_PAD_PTB1__GPIO_23 0x1181 + /* SDHC Enable */ + VF610_PAD_PTE19__GPIO_124 0x1183 + /* SDHC Overcurrent */ + VF610_PAD_PTB23__GPIO_93 0x1181 + /* GPI */ + VF610_PAD_PTE2__GPIO_107 0x1181 + VF610_PAD_PTE3__GPIO_108 0x1181 + VF610_PAD_PTE5__GPIO_110 0x1181 + VF610_PAD_PTE6__GPIO_111 0x1181 + /* GPO */ + VF610_PAD_PTE0__GPIO_105 0x1183 + VF610_PAD_PTE7__GPIO_112 0x1183 + /* RS485 Control */ + VF610_PAD_PTB8__GPIO_30 0x1183 + VF610_PAD_PTB9__GPIO_31 0x1183 + VF610_PAD_PTE8__GPIO_113 0x1183 + /* MPBUS MPB_EN */ + VF610_PAD_PTE28__GPIO_133 0x1183 + /* MISC */ + VF610_PAD_PTE10__GPIO_115 0x1183 + VF610_PAD_PTE11__GPIO_116 0x1183 + VF610_PAD_PTE17__GPIO_122 0x1183 + VF610_PAD_PTC30__GPIO_103 0x1183 + VF610_PAD_PTB0__GPIO_22 0x1181 + /* RESETINFO */ + VF610_PAD_PTE26__GPIO_131 0x1183 + VF610_PAD_PTD6__GPIO_85 0x1181 + VF610_PAD_PTE27__GPIO_132 0x1181 + VF610_PAD_PTE13__GPIO_118 0x1181 + VF610_PAD_PTE21__GPIO_126 0x1181 + VF610_PAD_PTE22__GPIO_127 0x1181 + /* EE_5V_EN */ + VF610_PAD_PTE18__GPIO_123 0x1183 + /* EE_5V_OC_N */ + VF610_PAD_PTE25__GPIO_130 0x1181 + >; + }; + + pinctrl_can0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x1181 + VF610_PAD_PTB15__CAN0_TX 0x1182 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x1181 + VF610_PAD_PTB17__CAN1_TX 0x1182 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi3: dspi3grp { + fsl,pins = < + VF610_PAD_PTD10__DSPI3_CS0 0x1181 + VF610_PAD_PTD11__DSPI3_SIN 0x1181 + VF610_PAD_PTD12__DSPI3_SOUT 0x1182 + VF610_PAD_PTD13__DSPI3_SCK 0x1181 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30dd + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de + >; + }; + + pinctrl_gpio_leds: gpio_leds { + fsl,pins = < + /* Heart bit LED */ + VF610_PAD_PTE12__GPIO_117 0x1183 + /* LEDS */ + VF610_PAD_PTE15__GPIO_120 0x1183 + VF610_PAD_PTA12__GPIO_5 0x1183 + VF610_PAD_PTA16__GPIO_6 0x1183 + VF610_PAD_PTE9__GPIO_114 0x1183 + VF610_PAD_PTE20__GPIO_125 0x1183 + VF610_PAD_PTE23__GPIO_128 0x1183 + VF610_PAD_PTE16__GPIO_121 0x1183 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x34df + VF610_PAD_PTA23__I2C2_SDA 0x34df + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f + VF610_PAD_PTD1__QSPI0_A_CS0 0x397f + VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f + VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f + VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f + VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f + VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f + VF610_PAD_PTD8__QSPI0_B_CS0 0x397f + VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f + VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f + >; + }; +};
Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181008/997d0636/attachment-0001.sig>