[PATCH 20/21] arm64: dts: ls104x: add iommu-map to pci controllers
From: laurentiu.tudor@nxp.com (laurentiu.tudor at nxp.com)
Date: 2018-09-19 12:37:09
Also in:
linux-devicetree, lkml, netdev
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
From: Laurentiu Tudor <laurentiu.tudor@nxp.com> The pci controllers are also behind the smmu so add the iommu-map property to reflect this. The bootloader needs to patch the stream id ranges to some sane values. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++ 2 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 48091409c472..3b7b2e60bd9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi@@ -716,6 +716,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -741,6 +742,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -766,6 +768,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 40484f6f6d42..890d1565791f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi@@ -685,6 +685,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -710,6 +711,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -735,6 +737,7 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; + iommu-map = <0 &mmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
--
2.17.1