On Wed, Sep 5, 2018 at 1:21 PM, Maxime Ripard [off-list ref] wrote:

On Wed, Sep 05, 2018 at 12:56:03PM +0530, Jagan Teki wrote:

quoted

On Tue, Sep 4, 2018 at 10:10 AM, Icenowy Zheng [off-list ref] wrote:

quoted

From: Jagan Teki <jagan@amarulasolutions.com>

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v4:
- Rebase some device trees.
Changes in v3,1:
- Squash all enablement patches altogether.
- Change supply name to match DT binding & driver change.
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-orangepi-win.dts | 34 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 34 +++++++++++++++++++
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++
 6 files changed, 204 insertions(+)

Tested-by: Jagan Teki <jagan@amarulasolutions.com> # BPI-M64, OPI-Win,
A64-Olinuxino, NPI-A64

Pine64 boards look unable by saying
[drm] Cannot find any crtc or sizes

May be someone can confirm, it.

Then we should drop the pine64 additions until someone figures it out,
as it has been already discussed.

That is fine, but If anyone have pine64 can confirm this.