[PATCH v4 11/13] ARM: dts: sun7i: a20: add sata-port/sata-phy nodes
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: 2018-08-30 19:01:50
Also in:
linux-devicetree, linux-ide, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch convert sun7i-a20 sata to the new binding which use a sata phy node. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8f7e1e29841f..8ff28f7afa85 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi@@ -667,6 +667,19 @@ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + sata_port: sata-port at 0 { + reg = <0>; + phys = <&sata_phy>; + }; + }; + + sata_phy: sata-phy at 1c180c0 { + compatible = "allwinner,sun4i-a10-sata-phy"; + reg = <0x1c180c0 0x200>; + #phy-cells = <0>; }; ehci1: usb at 1c1c000 {
--
2.16.4