[PATCH] memory: Convert to using %pOFn instead of device_node.name

@@ -2145,8 +2145,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 			gpmc_s.device_width = GPMC_DEVWIDTH_16BIT;
 			break;
 		default:
-			dev_err(&pdev->dev, "%s: invalid 'nand-bus-width'\n",
-				child->name);
+			dev_err(&pdev->dev, "%pOFn: invalid 'nand-bus-width'\n",
+				child);
 			ret = -EINVAL;
 			goto err;
 		}

@@ -2186,8 +2186,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 
 	ret = gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
-			child->name);
+		dev_err(&pdev->dev, "failed to set gpmc timings for: %pOFn\n",
+			child);
 		goto err_cs;
 	}
 

@@ -2215,7 +2215,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 
 err_child_fail:
 
-	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+	dev_err(&pdev->dev, "failed to create gpmc child %pOFn\n", child);
 	ret = -ENODEV;
 
 err_cs:

@@ -2265,14 +2265,10 @@ static void gpmc_probe_dt_children(struct platform_device *pdev)
 	struct device_node *child;
 
 	for_each_available_child_of_node(pdev->dev.of_node, child) {
-
-		if (!child->name)
-			continue;
-
 		ret = gpmc_probe_generic_child(pdev, child);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n",
-				child->name, ret);
+			dev_err(&pdev->dev, "failed to probe DT child '%pOFn': %d\n",
+				child, ret);
 		}
 	}
 }

@@ -139,8 +139,8 @@ static int exynos_srom_probe(struct platform_device *pdev)
 	for_each_child_of_node(np, child) {
 		if (exynos_srom_configure_bank(srom, child)) {
 			dev_err(dev,
-				"Could not decode bank configuration for %s\n",
-				child->name);
+				"Could not decode bank configuration for %pOFn\n",
+				child);
 			bad_bank_config = true;
 		}
 	}

@@ -345,7 +345,7 @@ static int load_one_timing(struct tegra_mc *mc,
 	err = of_property_read_u32(node, "clock-frequency", &tmp);
 	if (err) {
 		dev_err(mc->dev,
-			"timing %s: failed to read rate\n", node->name);
+			"timing %pOFn: failed to read rate\n", node);
 		return err;
 	}
 

@@ -360,8 +360,8 @@ static int load_one_timing(struct tegra_mc *mc,
 					 mc->soc->num_emem_regs);
 	if (err) {
 		dev_err(mc->dev,
-			"timing %s: failed to read EMEM configuration\n",
-			node->name);
+			"timing %pOFn: failed to read EMEM configuration\n",
+			node);
 		return err;
 	}
 

@@ -888,8 +888,8 @@ static int load_one_timing_from_dt(struct tegra_emc *emc,
 
 	err = of_property_read_u32(node, "clock-frequency", &value);
 	if (err) {
-		dev_err(emc->dev, "timing %s: failed to read rate: %d\n",
-			node->name, err);
+		dev_err(emc->dev, "timing %pOFn: failed to read rate: %d\n",
+			node, err);
 		return err;
 	}
 

@@ -900,16 +900,16 @@ static int load_one_timing_from_dt(struct tegra_emc *emc,
 					 ARRAY_SIZE(timing->emc_burst_data));
 	if (err) {
 		dev_err(emc->dev,
-			"timing %s: failed to read emc burst data: %d\n",
-			node->name, err);
+			"timing %pOFn: failed to read emc burst data: %d\n",
+			node, err);
 		return err;
 	}
 
 #define EMC_READ_PROP(prop, dtprop) { \
 	err = of_property_read_u32(node, dtprop, &timing->prop); \
 	if (err) { \
-		dev_err(emc->dev, "timing %s: failed to read " #prop ": %d\n", \
-			node->name, err); \
+		dev_err(emc->dev, "timing %pOFn: failed to read " #prop ": %d\n", \
+			node, err); \
 		return err; \
 	} \
 }