[PATCH 4/4] dt-bindings: phy-rockchip-inno-usb2: add new rockchip, force-bvalid property.
From: Enric Balletbo i Serra <hidden>
Date: 2018-08-15 09:59:52
Also in:
linux-devicetree, linux-rockchip, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This property is used when the otg-id pin is not connected. When this property is set it forces to set the B-Device Session Valid bit when the port works as device and clears that bit when the port works as host. Signed-off-by: Enric Balletbo i Serra <redacted> --- .../devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 2d4808d3920b..55761f466c41 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt@@ -48,6 +48,11 @@ Optional properties: See ./phy-bindings.txt for details. - rockchip,utmi-avalid : boolean, use the avalid register to get vbus status. Otherwise, use the bvalid register. + - rockchip,force-bvalid : boolean, set this to force the B-Device Session + Valid bit when the usb port is in device mode. This + is used when the otg-id pin is not connected. + Only supported in case of compatible being: + * "rockchip,rk3399-usb2phy" Example:
--
2.18.0