[linux-sunxi] [PATCH v3.1 10/10] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
From: icenowy@aosc.io (Icenowy Zheng)
Date: 2018-07-27 00:44:24
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
? 2018?7?27? GMT+08:00 ??2:03:00, "Jernej ?krabec" [off-list ref] ??:
Dne ?etrtek, 26. julij 2018 ob 19:12:57 CEST je Icenowy Zheng napisal(a):quoted
From: Jagan Teki <jagan@amarulasolutions.com> Enable all necessary device tree nodes and add connector node todevicequoted
trees for all supported A64 boards with HDMI. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [Icenowy: squash all board patches altogether and change supply name] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Changes in v3,1: - Squash all enablement patches altogether. - Change supply name to match DT binding & driver change. Changes for v3: - Enable all pipeline components Changes for v2: - none .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34+++++++++++++++++++quoted
.../dts/allwinner/sun50i-a64-nanopi-a64.dts | 34+++++++++++++++++++quoted
.../dts/allwinner/sun50i-a64-olinuxino.dts | 34+++++++++++++++++++quoted
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 34+++++++++++++++++++quoted
.../boot/dts/allwinner/sun50i-a64-pine64.dts | 34+++++++++++++++++++quoted
.../allwinner/sun50i-a64-sopine-baseboard.dts | 34+++++++++++++++++++quoted
6 files changed, 204 insertions(+) diff --gita/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dtsquoted
b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 094cfed13df9..0d8f5571d574 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts@@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds";@@ -86,6 +97,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; };@@ -103,6 +118,17 @@ status = "okay"; }; +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>;@@ -120,6 +146,10 @@ }; }; +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;@@ -300,6 +330,10 @@ vcc-hdmi-supply = <®_dldo1>; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dtsb/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5cc..2bcf02f46366 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts@@ -57,6 +57,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci0 {@@ -67,6 +82,17 @@ status = "okay"; }; +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + /* i2c1 connected with gpio headers like pine64, bananapi */ &i2c1 { pinctrl-names = "default";@@ -78,6 +104,10 @@ bias-pull-up; }; +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;@@ -199,6 +229,10 @@ vcc-hdmi-supply = <®_dldo1>; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dtsb/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3f531393eaee..5445a7a1db51 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts@@ -58,12 +58,42 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&de { + status = "okay"; +}; + +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;@@ -218,6 +248,10 @@ vcc-hdmi-supply = <®_dldo1>; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;diff --gita/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dtsquoted
b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 1221764f5719..81a8f92c6c35 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts@@ -57,12 +57,42 @@ chosen { stdout-path = "serial0:115200n8"; }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { status = "okay"; }; +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;@@ -195,6 +225,10 @@ vcc-hdmi-supply = <®_dldo1>; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dtsb/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 1b9b92e541d2..1b972bade9f6 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts@@ -62,6 +62,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci0 {@@ -82,6 +97,17 @@ }; +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>;@@ -99,6 +125,10 @@ }; }; +&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>;@@ -238,6 +268,10 @@ status = "disabled"; }; +&tcon1 { + status = "okay"; +}; + /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default";diff --gita/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dtsquoted
b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index c21f2331add6..eff44b069b1d 100644--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts@@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc1v8: vcc1v8 { compatible = "regulator-fixed"; regulator-name = "vcc1v8";@@ -69,6 +80,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; };@@ -86,6 +101,17 @@ status = "okay"; }; +&hdmi { + hdmi-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy at 1 { compatible = "ethernet-phy-ieee802.3-c22";@@ -93,6 +119,10 @@ }; }; +&mixer1 { + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>;@@ -138,6 +168,10 @@ vcc-hdmi-supply = <®_dldo1>;How is it possible to have vcc-hdmi-supply already defined? Did I miss
It's for simplefb.
some patch? Best regards, Jernejquoted
}; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;