[PATCH v2 1/3] clk: meson: add DT documentation for emmc clock controller
From: Yixun Lan <hidden>
Date: 2018-07-10 08:40:22
Also in:
linux-amlogic, linux-clk, linux-devicetree, lkml
Subsystem:
arm/amlogic meson soc clock framework, common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Neil Armstrong, Jerome Brunet, Stephen Boyd, Brian Masney, Jerome Brunet, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document the MMC sub clock controller driver, the potential consumer of this driver is MMC or NAND. Signed-off-by: Yixun Lan <redacted> --- .../bindings/clock/amlogic,mmc-clkc.txt | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
diff --git a/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
new file mode 100644
index 000000000000..ff6b4bf3ecf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt@@ -0,0 +1,31 @@ +* Amlogic MMC Sub Clock Controller Driver + +The Amlogic MMC clock controller generates and supplies clock to support +MMC and NAND controller + +Required Properties: + +- compatible: should be: + "amlogic,meson-gx-mmc-clkc" + "amlogic,meson-axg-mmc-clkc" + +- #clock-cells: should be 1. +- clocks: phandles to clocks corresponding to the clock-names property +- clock-names: list of parent clock names + - "clkin0", "clkin1" + +Parent node should have the following properties : +- compatible: "syscon", "simple-mfd, and "amlogic,meson-axg-mmc-clkc" +- reg: base address and size of the MMC control register space. + +Example: Clock controller node: + +sd_mmc_c_clkc: clock-controller at 7000 { + compatible = "amlogic,mmc-clkc", "syscon", "simple-mfd"; + reg = <0x0 0x7000 0x0 0x4>; + #clock-cells = <1>; + + clock-names = "clkin0", "clkin1"; + clocks = <&clkc CLKID_SD_MMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; +};
--
2.18.0