[PATCH v2 01/23] thermal: armada: remove useless register accesses
From: miquel.raynal@bootlin.com (Miquel Raynal)
Date: 2018-06-25 15:12:17
Also in:
linux-devicetree, linux-pm
Subsystem:
marvell mvebu thermal driver, the rest, thermal · Maintainers:
Miquel Raynal, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
Prepare the migration to use regmaps by first simplifying the initialization functions: avoid unnecessary write/read cycles on configuration registers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/thermal/armada_thermal.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 077e8e562306..6fdb90b3c001 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c@@ -103,16 +103,13 @@ static void armadaxp_init_sensor(struct platform_device *pdev, reg = readl_relaxed(priv->control1); reg |= PMU_TDC0_OTF_CAL_MASK; - writel(reg, priv->control1); /* Reference calibration value */ reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); - writel(reg, priv->control1); /* Reset the sensor */ - reg = readl_relaxed(priv->control1); - writel((reg | PMU_TDC0_SW_RST_MASK), priv->control1); + reg |= PMU_TDC0_SW_RST_MASK; writel(reg, priv->control1);
@@ -129,14 +126,13 @@ static void armada370_init_sensor(struct platform_device *pdev, reg = readl_relaxed(priv->control1); reg |= PMU_TDC0_OTF_CAL_MASK; - writel(reg, priv->control1); /* Reference calibration value */ reg &= ~PMU_TDC0_REF_CAL_CNT_MASK; reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS); - writel(reg, priv->control1); reg &= ~PMU_TDC0_START_CAL_MASK; + writel(reg, priv->control1); msleep(10);
--
2.14.1