[PATCH v4 1/6] dt-bindings: media: rcar-vin: Describe optional ep properties
From: jacopo+renesas@jmondi.org (Jacopo Mondi)
Date: 2018-06-12 14:26:01
Also in:
linux-devicetree, linux-media, linux-renesas-soc
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Describe the optional endpoint properties for endpoint nodes of port at 0 and port at 1 of the R-Car VIN driver device tree bindings documentation. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/media/rcar_vin.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index a19517e1..87f93ec 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt@@ -53,6 +53,14 @@ from local SoC CSI-2 receivers (port1) depending on SoC. from external SoC pins described in video-interfaces.txt[1]. Describing more then one endpoint in port 0 is invalid. Only VIN instances that are connected to external pins should have port 0. + + - Optional properties for endpoint nodes of port at 0: + - hsync-active: see [1] for description. Default is active high. + - vsync-active: see [1] for description. Default is active high. + + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + - port 1 - sub-nodes describing one or more endpoints connected to the VIN from local SoC CSI-2 receivers. The endpoint numbers must use the following schema.
@@ -62,6 +70,8 @@ from local SoC CSI-2 receivers (port1) depending on SoC. - Endpoint 2 - sub-node describing the endpoint connected to CSI40 - Endpoint 3 - sub-node describing the endpoint connected to CSI41 + Endpoint nodes of port at 1 do not support any optional endpoint property. + Device node example for Gen2 platforms --------------------------------------
--
2.7.4