-----Original Message-----
From: Anson Huang
Sent: Sunday, June 3, 2018 9:44 AM
To: shawnguo at kernel.org; kernel at pengutronix.de; Fabio Estevam
[off-list ref]; robh+dt at kernel.org; mark.rutland at arm.com;
mturquette at baylibre.com; sboyd at kernel.org;
michael at amarulasolutions.com; matteo.lisi at engicam.com
Cc: dl-linux-imx <redacted>; linux-arm-kernel at lists.infradead.org;
devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
linux-clk at vger.kernel.org
Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks

i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver
to make sure all GPIO banks work as expected.

Signed-off-by: Anson Huang <redacted>
---
	no changes since V1.
 arch/arm/boot/dts/imx6ul.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1241972..405e068 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi

@@ -437,6 +437,7 @@
 				reg = <0x0209c000 0x4000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;

@@ -450,6 +451,7 @@
 				reg = <0x020a0000 0x4000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;

@@ -462,6 +464,7 @@
 				reg = <0x020a4000 0x4000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;

@@ -474,6 +477,7 @@
 				reg = <0x020a8000 0x4000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;

@@ -486,6 +490,7 @@
 				reg = <0x020ac000 0x4000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
--

2.7.4