Hi,

On 13/06/18 16:13, Ryan Grachek wrote:

These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES.

I don't have a hikey620 to test this, but the hikey960 is suffering from the
same issue (see [1]). I added these properties to the dwmmc2 node of the
hikey960 (see snippet) and wlan0 does show up. Would you mind sending a
similar patch for that board ?

Thanks !

Valentin

[1]: https://lkml.org/lkml/2018/6/12/930

--->8

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 85aadf1b..c706f70 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts

@@ -613,6 +613,8 @@
        vmmc-supply = <&wlan_en>;
        ti,non-removable;
        non-removable;
+       cap-power-off-card;
+       keep-power-in-suspend;
        #address-cells = <0x1>;
        #size-cells = <0x0>;
        status = "ok";